User Manual

608 p/n 2M-76467 8740 Tea Brewer Owners Manual
CLEANING INSTRUCTIONS
PROCEDURE: Clean Tea Brewer
PRECAUTIONS: Disconnect brewer from electric power.
Allow brewer to cool.
FREQUENCY: Daily
TOOLS: Mild Detergent, Clean Soft Cloth or Sponge
Bristle Brush, Bottle Brush
1. Disconnect brewer from electric power.
Allow brewer to cool before cleaning.
2. Remove dispenser.
3. Remove and empty brew chamber.
4. Remove the spray disk from the brew head (See gure 8):
Press up on the spray disk ears, then turn the disk to the left
to unlatch. Remove the gasket from inside the brew head.
5. Wipe inside of brew head and area around the brew head
with a soft clean cloth or sponge moistened with clean water.
6. Wash the spray disk in a sink using warm water and a mild
detergent. A bristle brush may be used to clear clogged
spray holes. Rinse the spray disk with clean water and allow
to air dry.
7. Wash the brew chamber in a sink using warm water and a
mild detergent. Rinse with clean water and allow to air dry.
8. Wipe the exterior of the brewer with a soft clean cloth or
sponge moistened with clean water.
9. Reinstall the gasket INSIDE the brew head, and then reinstall
the spray disk.
10. Clean dispensers by lling with warm soapy water. Empty
and rinse with clean water. Wipe the exterior with a soft
clean cloth or sponge moistened with clean water. Invert and
allow to air dry.
Procedure is complete
CAUTION:
BURN HAZARD
Brewing and serving
temperatures of tea are
extremely hot.
Hot tea will cause serious skin
burns.
CAUTION:
SHOCK HAZARD
Do not submerge or immerse
brewer in water.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the brewer or dispensers.
Fig. 8 Cleaning
9
GASKET
SPRAY
DISK
LIFT EARS UP
TURN LEFT TO
REMOVE
IL1690