Specifications
658 2M-Z17969 Owners Manual 2121 E-Max Satellite Brewer
11
OPERATION (continued)
8. Clock
A. Time – Battery Backup. The E-Max has a battery backup system which will maintain the proper time
during power failures, or when the brewer is unplugged (even for very prolonged periods of time).
Normally there will not be a need to set the time except for Daylight Saving
Time changes, or moving the brewer to different time zones.
B. Changing Day and Time: To change time, turn the E-Max off. Press the 2nd key twice
followed by the 1st key twice to access the time change mode, (i.e. press CANCEL, CANCEL,
BREW, BREW). In the time change mode the screen will read “Day:” followed by the current
day setting. Use the 6th key to advance the day, or the 5th key to reverse. When day has
been properly set, press the 3rd key. The screen will now read “Time:” with the set time on
the screen, the hour and am or pm ashing. Use the 5th key to go back or the 6th key to
advance the hour, making sure that the am or pm is correct. When the hour and am/pm is
correctly set, press the 3rd key, and the screen will read “Time:” with the set time on the
screen, minutes ashing. As previously use the 5th or 6th keys to adjust the minutes, and
press the 3rd key when complete. E-Max will return to the off mode. (Changing time can
also be done in the regular programming mode. Consult the E-Max Programming Manual)
C. After Hours: Consult the E-Max Programming Manual to set the After Hours mode.
The factory programming has the After Hours mode turned OFF. The After Hours can be programmed
to come on from 1 to 6 hours after the last brew. When the E-Max goes into the After Hours mode, any
warmer plates left on will be turned off (on decanter brewers), the water in the tank will be allowed to
drop from the normal brewing temperature and will reheat less frequently – this feature saves energy and
extend component life. While in the After Hours mode, the power light will ash continuously. When the
BREW switch is pressed the E-Max automatically reverts back to normal operation, heating the water to
the Precise Temperature for Brewing (PTB), before starting the brew. (The power light will be on
continuously and the Brew light will ash until the correct water temperature is reached.)
9. Countdown Quality Timer: Refers to coffee warmers, when “ON” the warmers will automatically
turn off between 20 to 120 minutes, depending on how they are programmed.