Specifications

643 2M-Z17088 Owners Manual 1883 E.B.C. Lo-Prole Airpot Brewer, 643 2M-Z17088 Owners Manual 1883 E.B.C. Lo-Prole Airpot Brewer,
643 2M-Z17088 Owners Manual 1883 E.B.C. Lo-Prole Airpot Brewer, 643 2M-Z17088 Owners Manual 1883 E.B.C. Lo-Prole Airpot Brewer,
SERVICING INSTRUCTIONS (continued)
REPLACE SOLENOID


Remove front panel. Remove two screws holding access door in

cap to release solenoid from door.
Remove wiring from solenoid.


Reassemble in reverse order.
REPLACE FAUCET SUPPLY HOSE




solenoid bypass outlet.

Reassemble in reverse order.
REPLACE HOT WATER FAUCET COIL


Remove tank lid assembly per above.
Remove two hex nuts hot water coil to cover. Pull coil from
mounting holes.
Reassemble in reverse order.
REPAIR HOT WATER FAUCET

Unscrew aerator cap from faucet and remove handle retaining
clip. Do not let faucet body turn.
Pull bonnet assembly from faucet body.
Examine the interior of the faucet body and the surface of the
seat cup. Clean out any debris in the faucet body, using a stiff
bristle brush if necessary.

straightener, using a stiff bristle brush if necessary.
Reassemble in reverse order.
IMPORTANT: When replacing
water faucet coil, also replace
seal gaskets.
NOTE: Any abrasion or

seat cup will require replacing
the seat cup:
Work the seat cup out of the
bonnet and off of the end of the
stem.

sure the knob on the stem is
fully inserted into the pocket of
the seat cup, and the skirt of the
seat cup is fully inserted into the
bonnet.

Fig. 11 Fill Solenoid
IL2690
SOLENOID
STRAINER
(note orientation
DO NOT REVERSE)
WASHER
INLET
FITTING
CAP
FILL
SOLENOID
FLOW
Fig. 12 Faucet Hose Fitting
WHITE CLINCH
RING
METAL FITTING
BYPASS
OUTLET
PRESS CLINCH RING TOWARD
METAL FITTING TO RELEASE
IL2688