User's Manual
P a g i n a | 6
MANUAL | yooBee Badge Tracker yB-010040-BT
5. Troubleshooting
The yooBee Badge Tracker has a multi-colored LED, that can be used for troubleshooting:
LED Code
Meaning
1x red short blink
Button press detected, tag unconnected
1 or more red short blinks
Button press detected, tag connected, and waiting TX
confirmation
1x green 10s after button press
Button press detected, tag connected, and received
TX confirmation
Series of short blue blink
Firmware update
1x red short blink after firmware update blue blinks
Firmware update failed
In case of possible malfunction, please contact technical support to receive proper
replacements (email: support@blooloc.com). Replacement policy also applies to performance
faults caused by low battery before certain operation time.
6. Disposal of the device
yooBee Badge Trackers contain electronic elements and batteries which should be properly
disposed and compliant to local regulations.
7. Safety Instructions
Opening yooBee Badge Trackers is strictly forbidden. Switching the original battery with one
of a different type might cause a risk of explosion.
8. Technical Specifications
Technical Specification
Dimensions
86,2 mm x 54,2 mm x 6,8 mm
Operational
Temperature
-20°C to +60°C
Weight
25g
Storage Temperature
-25°C to +70°C
Radio
• NFC Forum Type 4,
ISO/IEC14443
• 2.4 GHz BLE 0dBm TX power
Sensor
• Ambient temperature
• Inertial and magnetic
field sensor
• Push button
Power Supply
CR3032 3V replaceable lithium
cell battery (expected lifetime 5
years)
Material
• Reinforced
polyamide
• UV-light resistant
• Zero outgassing
Update Rate
1 per second
Options
Customizable print
Certifications
CE, FCC, ISED