User's Manual

P a g i n a | 3
MANUAL | yooBee Badge Tracker yB-010040-BT
1. General information
yooBee Badge Trackers are used to track the position of people with an accuracy of up to 1-2
meter. The yooBee Badge Tracker is a small, lightweight and water resistant device that can
worn attached to a lanyard. It can also be attached to assets as a sticker. It is powered with a
replaceable coin cell battery that offers approximately five years lifetime with a position update
once per second, assuming 8 hours of activity per day.
The yooBee Badge Tracker features:
• NFC for identification or access control purposes. Custom RFID tags can be added
on demand.
• Multicolor LED for troubleshooting
• Inertial sensors: Accelerometer, magnetometer
yooBee Trackers are remotely managed through the cloud console for configuration, over-the-
air updates, battery status monitoring and event logging.
2. Getting started
yooBee Trackers are by default in “Transport mode”, which is a deep sleep mode to preserve
battery life time during shipping. Before using the tracker, the device must be switched ON via
NFC by means of the yooBee Toolbox smartphone app.
To switch on the device, tap the “SWITCH ON” button and hold the device close the NFC
antenna of your smartphone.