User Manual
40
USA
Detergent remains in detergent dispenser.
 • Detergent dispenser was damp when adding detergent. >>> Make sure that 
the detergent dispenser is dried well prior to filling it with detergent.
 • Detergent is added long before the washing process. >>> Pay attention to 
add detergent shortly before start-up of the washing.
 • Opening of the detergent dispenser lid is prevented during washing. >>> 
Place the dishes in a way that will not prevent the detergent dispenser lid 
from opening and the water going into the machine from impellers.
 • Detergent is stored under unsuitable conditions. >>> If you are using powder 
detergent, do not store the detergent package in humid places. Keep it in a 
closed container if possible. For ease-of-storing, we recommend you to use 
tablet detergents.
 • Wash Arm holes are clogged. >>> Lower and upper Wash Arm holes might 
be clogged with food remnants such as lemon pips. Clean the Wash Arm 
regularly as illustrated in section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
C
Decorated glasses and decorated luster porcelains are not suitable for 
washing in the dishwasher. Manufacturers of glassware and porcelain 
tableware items do not recommend washing such kitchen utensils in 
the dishwashers either.
Dishes are scratched.
C
Kitchen utensils that contains or are made of aluminum should not be 
washed in dishwasher.
 • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling 
hole while adding salt. Spilled salt can cause scratches. Make sure that the 
salt reservoir lid is tightly closed after finishing the filling process. Run the 
prewash program to remove the salt that spilled inside the machine. Since 
the salt granules that will remain under the lid will dissolve during prewash, 
causing the lid loosen, check the lid once again at the end of the program.
 • Water hardness setting is low or salt level is insufficient >>> Measure the 
hardness of the supply water appropriately and check the water hardness 
setting.
 • Dishes are not placed orderly in the machine. >>> When placing the glasses 
and other glassware into the basket lean them not against other dishes but 
the edges or racks of the basket or the glass support wire. Striking of the 
glasses to each other or to other dishes due to the impact of water during 
washing can cause breaks, or scratches on their surfaces.










