User Manual

USA

A smear remains on glasses that resembles milk stain which can not be

removed when wiped by hand. A bluish / rainbow appearance occurs when

the glass is pointed to light.

• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled

rinse aid when adding rinse aid.

• Corrosion has occurred on glass due to soft water. >>> Measure the

hardness of the supply water appropriately and check the water hardness

setting. If your supply water is soft (<15 gpg), do not use salt. Choose

programs that wash in higher temperatures (140-149 degress Fahrenheit).

You can also use glass protective detergents that are commercially available.

Foam forms in the machine.

• Dishes are washed with hand-wash detergent by hand but not rinsed before

placing them into the machine. >>> Hand-wash detergents do not contain

antifoam. There is no need to hand-wash the dishes before placing them into

the machine. Removing the coarse soil on the dishes under tap water, with a

sponge or towel.

• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care

that rinse aid is not spilled in the machine when you are filling it. Clean any

spilled rinse ait with the help of a tissue paper/towel.

• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the

rinse aid reservoir is closed after adding rinse aid.

Kitchen utensils are broken.

• Dishes are not placed orderly in the machine. >>> Load the dishes as

described in the user manual.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their

capacity.

Water remains in the dishwasher at the end of the program.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter

system regularly as illustrated in section “Cleaning and Care”.

• Discharge hose is clogged/blocked. >>> Check the discharge hose. If

necessary, remove the discharge hose, clear the blockage and insert is as

illustrated in the user manual.

If you cannot eliminate the problem although you follow the

instructions in this section, consult your dealer or the Authorized

Service Agent. Never try to repair a nonfunctional product yourself.