User Manual
22
USA
Extra Rinse function
Depending on the type of the detergent 
used, if a detergent dissolving issue is 
encountered it will remove the resulting 
stains from the dishes and enables the 
optimum rinsing performance.
6.4 AUXILIARY FUNCTIONS
Washing programs of your dishwasher 
are designed to obtain the best 
cleaning result, considering the type of 
the soil, soiling degree and properties 
of the dishes to be washed.
Auxiliary functions are provided in 
order to enable you to save time, water 
and energy and to perform a more 
comfortable washing with conditions 
specific to you.
C
Auxiliary functions may 
cause changes in the 
program duration.
C
Auxiliary functions are not 
suitable for all washing 
programs. Indicator of the 
auxiliary function that is not 
compatible with the program 
will not be active.
To add auxiliary function to the 
programe:
1.  Select the desired washing 
programe by pressing the 
programe selection key.
2.  In the selected washing programe, 
if auxiliary function is selected, 
its symbol will be displayed on 
the screen. If the function button 
is pressed again the symbol 
will disappear and selection is 
cancelled.
3.  Selection will be cancelled when 
you press the function key again.
Rapid Clean Function
It shortens the time of the washing 
cycle selected and decreases water 
consumption by enabling washing 
under higher pressure.
Floor illumination
Illuminates to show program is still 
running.
(Select Models)
Your machine reflects a light to the 
floor during the washing process. This 
light turns off after the washing process 
is complete.
C
Floor illumination cannot be 
cancelled by the user.
Half Load function 
It is used to operate the machine 
without loading it completely.
1.  Load your dishes in the machine as 
you like. You can use both upper 
and lower racks.
2.  Turn the machine on with On/Off 
key.
3.  Select the desired program and 
press the Half Load key. The Half 
Load indicator will light on the 
display in the Function Selected 
indicator.
4.  Start the programme by pressing 
Start / Pause / Cancel key.










