Installation Guide

USA

7.3 ADJUSTING THE MOVABLE TOE KICK

Now that you have successfully installed the dishwasher, you

need to attach the toe kick to the dishwasher. The two piece

toe kick can be adjusted to the height and depth needed for

your kitchen. Be sure to use the slotted toe kick in the front

and the other behind it. They slide into each other.

Place parts K and L to the channel shown in Figure A for both

sides as shown in Figure B. Then x them in the direction

shown with the arrow in Figure C and Figure B.

7.2 READJUSTING FOOT

LEVELS

Now that the dishwasher is in the

cabinet you must readjust the feet to

bring the dishwasher up to the required

height and attach it underneath the

countertop.

1. Readjust the front foot levels with

adjusting wrench to balance the

dishwasher and raise it up under the

countertop, make sure the unit is level.

2. Readjust the rear foot levels with a

screwdriver to balance the dishwasher

and raise it to the required height using

the brackets supplied.

3. Attach the dishwasher underneath

the countertop with the four screws

supplied (Ø 1/8” x 1/8” - Ø 3.5mm

x 14mm). Make sure you do not go

through the top of the countertop or

damage granite.

TALL TUB MODELS ONLY