Installation Manual

13 / 63 EN
Over The Range Convection Microwave Oven / Installation Manual
4
External exhaust
4.4 Tools and materials
needed
#1Phillips screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Electric drill with
3
⁄16“,
1
⁄2“ and
5
⁄8“
drill bits
Hammer (optional)
Stud nderor
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed
bottom
cabinet installations
only)
Gloves
Saw (saber, hole or keyhole)
Level
Duct and masking tape
Scissors
(to cut template, if necessary)
Safety goggles