Oven ZEPH 100 G SpecSheet

BLODGETT OVEN COMPANY
www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]
ZEPHAIRE-100-G
Printed in U.S.A.
NOTE: FOR COMMERCIAL USE ONLY
APPROVAL/STAMP
P/N 52774 Rev K (6/15)
SHORT FORM SPECIFICATIONS: Provide Blodgett full-size convection oven model ZEPHAIRE-100-G, (single/double) compartment. Each compartment shall have porcelainized
steel liner and shall accept five 18” x 26” standard full-size bake pans in left to right positions. Doors shall have dual pane thermal glass windows with single powder coated handle and
simultaneous operation. Unit shall be gas heated with electronic spark ignition and shall cook by means of a dual-flow system combining direct and indirect heat. Air in baking chamber
distributed by dual inlet blower wheel powered by a two speed, 1/2 HP motor with thermal Overload protection. Each chamber shall be fitted with five chrome-plated removable racks.
Control panel shall be recessed with Cook/Cool Down mode selector, solid state manual infinite thermostat (200 - 500°F), and digital timer. Provide options and accessories as indicated.
POWER SUPPLY:
115 VAC, 1 phase, 6 Amp, 60 Hz., 2-wire with ground,
1/2 H.P., 2 speed motor, 1120 and 1710 RPM
6’ (1.8m) electric cord set furnished.
Blodgett recommends a Pass & Seymour, model 2095, GFCI
for this oven.
MINIMUM ENTRY CLEARANCE:
Uncrated 32-1/16” (814mm)
Crated 37-1/2” (953mm)
SHIPPING INFORMATION:
Approx. Weight:
Single: 535 lbs. (243 kg)
Double: 1070 lbs. (485 kg)
Crate sizes:
37-1/2” (952mm) x 43-1/2” (1105mm) x 51-3/4” (1315mm)
NOTE: The company reserves the right to make substitutions
of components without prior notice
DIMENSIONS:
Floor space 38-1/4” (972mm) W x 36-7/8” (936mm) L
Product clearance:
Oven Back 0” from combustible and non-combustible construction
Oven Sides 2” from combustible and non-combustible construction
Interior 29” (737mm) W x 20” (508mm) H x 24-1/4” (616mm) D
If oven is on casters:
Single Add 4-1/2” (114mm) to all height dimensions
Double Dimensions do not change
Double Low Profile Subtract 2-1/2” (64mm) from all dimensions
GAS SUPPLY:
3/4” IPS connection at rear of oven
Manifold Pressure:
• Natural – 3.5” W.C • Propane – 10” W.C.
Inlet Pressure:
• Natural – 7.0” W.C. min. – 10.5” W.C. max.
• Propane – 10.5” W.C. min. – 13.0” W.C. max.
MAXIMUM INPUT:
Single 50,000 BTU/hr
Double 100,000 BTU/hr
3 (76)
36.88
(937)
17.38
(441)
19.06 (484)
2.5 (64)
7.19 (183)
6 (152) dia.
3 (76)
38.25 (972)
TOP VIEW
DIMENSIONS ARE IN INCHES (MM)
SINGLE
DRAFT DIVERTER
57.06 (1450)
51.75 (1315)
35.5 (902)
25 (635)
0 (0)
6 (152)
28.38
(721)
DOUBLE
12.75 (324)
DRAFT HOOD
70.63 (1794)
16.25
(413)
38.56 (979)
33.25 (845)
17 (432)
6.5 (165)
0 (0)
41.94
(1065)
9.88
(251)