Specifications

Installation
4
Oven Assembly
ASSEMBLY TO STAND
1. Center the oven frame on top of the stand so
that the oven overhangs at both the front and
back. See Figure 1.
2. Remove the three screws at the top of the left
and right side panels of the oven. Remove the
side panels.
3. Align the two bolt holes on each side of the
stand with the two threaded holes on each
side of the oven. See Figure 1.
4. Insert a bolt from the bottom up through each
of the two holes and tighten securely.
5. Reinstall the side panels.
SIDE VIEW WITH STAND
Figure 1