Specifications

Operation
19
MenuSelectt Control
PROGRAMMING
Entering the Program Mode
1. Press the PROGRAM KEY (12). If the control
is password protected, the display reads ENĆ
TER CODE. Use the alpha/numeric keypad to
enter the manager passcode 3124, then press
the center of the dial to enter the program
mode.
Naming a Product Recipe
NOTE: Use the following procedure to name a
new product or edit the name of an existing
product.
1. For a new recipe, turn the dial to the first open
product. Press the center of the dial to select.
To edit an existing name, rotate the dial to the
name to be changed. Press the center of the
dial to select.
2. Use the dial to scroll down to Edit Name. Press
the center of the dial to enter the edit name
menu.
3. Turn the dial or use the alpha/numeric keypad
to select the first character. Press the center of
the dial to advance to the next character. ReĆ
peat for all remaining characters.
NOTE: Product names may be up to 10 charĆ
acters long and can contain spaces.
Use the #1 key to insert spaces in a
recipe name.
NOTE: To select letters using the keypad,
press the appropriate key once if you
need the first letter on the key, twice for
the second and three times for the
third. For example to enter the letter L
press the #5 key three times.
4. Press the PROG KEY (12) to save the name
and advance to product stage programming.
Programming a Product Recipe
NOTE: The control can hold 100 recipes. Each
recipe may have up to 6 cooking stages.
1. Turn the dial to highlight the name of the prodĆ
uct to be programmed. Press the center of the
dial to select the product.
2. The display reads PRODUCT NAME: STAGE 1.
Press the center of the dial to select the stage.
3. Rotate the dial, or use the alpha/numeric keyĆ
pad to enter the desired bake time. Press the
center of the dial to set the bake time.
4. Rotate the dial, or use the alpha/numeric keyĆ
pad to enter the desired bake temperature.
Press the center of the dial to set the bake temĆ
perature.
5. Rotate the dial, or use the alpha/numeric keyĆ
pad to enter up to two minutes of steam. Press
the center of the dial to set the steam time.
NOTE: The convection fan will not run during
a steam cycle. It is not necessary to set
a fan delay while steaming.
6. Rotate the dial to select the desired fan speed.
Choose from low or high. Press the center of
the dial to set the fan speed.
7. Rotate the dial, or use the alpha/numeric keyĆ
pad to enter up to 1 hour and 39 minutes of fan
delay. Press the center of the dial to set the fan
delay.
8. Rotate the dial, or use the alpha/numeric keyĆ
pad to set the vent position. The vent may be
opened from 0% to 100%. Press the center of
the dial to set the vent position.
9. Rotate the dial, or use the alpha/numeric keyĆ
pad to set the vent delay time. Entering a value
of 0 means the vent will open at the beginning
of the bake cycle. Press the center of the dial
to set the vent delay time.
10. Use the dial to scroll down to PRODUCT
NAME: STAGE 2. Press the center of the dial to
select stage 2.
11. Repeat steps 2Ć10 for all remaining stages.
12. When all stages have been programmed,
press the PROG KEY (12). Use the dial to
scroll to SAVE. Press the center of the dial to
save the program.