Specifications

Installation
11
Oven Assembly
CONVEYOR BELT SUPPORT
NOTE: Conveyor belt support is shippedinstalled
on some units.
1. Slide the drive side conveyor support rack into
theconveyorsupportguides.
NOTE: The pulley on the conveyor rack must
be inside th e elect ric a l box af te r being
pushed into the oven. See View A.
2. Install the drive belt around the drive motor
pull ey and the pull ey on the convey or rack. Pul l
the co nvey o r rack forward to tighten the belt.
3. Secure the conveyor using the spring loaded
conveyor locating pin. See View A.
4. Slide the idle side conveyor rack into the con-
veyor support guides until it touches the drive
side conveyor rack.
NOTE: If the mounting hole cannot be lined up or
the belt is too loose, the drive motor will
need to be repositioned.
Drive Side
Conveyor Rack
Idle Side
Conveyor Rack
See View A
View A
Pulley
Locating
Pin
Front and Rear
Conveyor Support
Guides
Figure 7