- BLODGETT OVEN COMPANY OPERATION CONVECTION OVEN

Installation
6
Oven Assembly
LEG ATTACHMENT
1. Lay the oven on its back.
2. Align the threaded stud in each leg with the
nut located inside each bottom corner of the
ovenframe. Turn the legsclockwiseandtight-
en to the nearest full turn.
3. Align the two leg plate holes in each leg with
thoseinthe ovenbottom. Secureeach legus-
ing two 1/ 2” bolts.
NOTE: If using casters see CASTER AS-
SEMBLY before proceeding.
4. Tip the oven up on the legs.
5. Level the ovenby screwing the adjustableleg
feet in or out as necessary.
6” (15 cm) Legs Shown
Figure 4
CASTER ASSEMBLY
NOTE: Install the locking casters on the front of
theoven.Installthenon-lockingcasterson
the back of the oven.
NOTE: Use a gas hose restraint on all units with
casters. See page 13.
Casters for Single and Double Stacked Ovens:
1. Attach the legs as described.
2. Pry the adjustable feet out of the legs.
3. Insert one caster into each leg as shown.
Tighten the lock nuts to secure the casters.
Adjustable
Leg F oot
Caster Assembly
Gas Hose
Restrain t Bracket
Figure 5
LowProfileCastersforDoubleStackedOvens:
1. Align the three h oles in each caster assembly
plate with those in the oven bottom. Secure
each caster using three 1/2” bolts.
Gas Hose Restraint Bracket
Figure 6