Conveyor Ovens Installation, Operation, Maintenance Manual MT3855G-G

Installation
8
Oven Assembly
FOLDING CONVEYOR
The folding conveyor assembly must be installed
from the control box side of the oven.
1. Unfold the right side of the conveyor.
2. Push the conveyor into the support tracks.
See Figure 6. Be careful to avoid hitting the
red emergency off switch on the side of the
control box.
3. Unfoldtheleftsideoftheconveyorandcontin-
ue to push into the support tracks.
4. Insert the conveyor in beyond the normal rest-
ing position.
5. Install the drive chain around the drive motor
sprocket and t he conveyor sprocket. See
Figure 7.
NOTE: Figure 7 shown without chain guard
and control box cov er for clarity.
6. Pull the conveyor back out of the oven untilthe
1/4 -20 thumb screw can be installed through
the conveyor support and into the controlbox.
SeeFigure8.
NOTE: If the mounting hole cannot be lined up or
the chain is too loose, the drive motor will
need to be repositioned.
Figure 6
Figure 7
Figure 8