Conveyor Ovens Installation, Operation, Maintenance Manual MT3855G-G

Installation
7
Oven Assembly
RETURN AIR DIVERTERS
1. Lift the front end of the diverter and slide the
clips up a nd behind the oven’s rear wall.
2. Low er the front end and slide the diverter into
place. The diverters must be installed in the
correct order. See Figure 4.
NOTE: Be sure the edges of the left and right div-
erters line up with the cutout in the rear
oven wall.
Right DiverterLeft Diverter Inner Diverter
Air Diverters --- Bottom View
Clip
Left Diverter
Inner Diverter
Right Diverter
Top View
Figure 4
NOZZLES
1. Install the nozzles from center of the oven
working towards the ends. Make sure the bot -
tom of the air nozzle fits into the slot in the
nozzle support located at the front of t he oven.
SeeFigure5forcorrectnozzlelocation.
2. Secure the nozzle hold-down strip across the
inside front of the oven using the existing
screws located on the oven wall.
M7106
M7105
Top View
Nozzle M7105 ---
1holeinflangeat
open end
Nozzle M7106 ---
2holesinflange
at open end
Figure 5