Specifications

Installation
4
Delivery and Inspection
All Blodgett ovens are shipped in containers to
prevent damage. Upon delivery of your new oven:
D Inspect the shipping container for external dam-
age. Any evidence of damage should be noted
on the delivery receipt which must be signed by
the driver.
D Uncrate the oven and check for internal dam-
age. Carriers will accept claims for concealed
damage if notified within fifteen days of delivery
and the shipping container is retained for in-
spection.
The Blodgett Oven Company cannot assume
responsibility for loss or damage suffered in
transit. The carrier assumed full responsibility
for delivery in good order when the shipment
was accepted. We are, however, prepared to
assist you if filing a cl aim is necessary.
The oven can now be moved to the installation
site. Check the following list with Figure 2 on page
3 to be sure all items w ere received.
Part Description
Qty.
Main oven body 1
Oven support with casters
(2 locking, 2 non-locking)
4*
Left conveyor support assembly 1
Right conveyor support assembly 1
Upper end plug assembly --- entrance 1
Low er end plug assembly 2
Upper end plug assembly --- exit 1
Rolledwireconveyorbelt 1
Crumb pan 2
Nozzles 11
Window Assembly 1
Air flow plate removal handle 1*
Part Description Qty.
Return air diverters 2
Packet containing: 3/8”-16 bolts for oven
supports
1*
Packet containing: flat & lock washers for
oven supports
1*
Packet containing:
(2) 10 amp motor circuit fuses
(2) 4 amp control circuit fuses
(2) glass DC fuses,
1*
Packet containing: conveyor inner and
outer master links
1*
Extra piece of wire conveyor belt 1*
Owner’s manual 1*
NOTE: * --- not shown in Figure 2.