Specifications

Introduction
3
Oven Components
Conveyor Belt --- stainless steel chain link (con -
veyor) belt that carries product through the oven.
Conveyor Belt Master Links --- a llow e a sy r e mo v -
al of the conveyor belt for maintenance and clean-
ing. Identified by locating double spaces between
regular links on belt.
Conveyor Belt Support Assembly (drive & idle
sides) ---locatedonbothendsofovendeck.Drive
side support drives conveyor belt.
Control Box --- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor --- provides power to move the con-
veyor belt. Located inside t he control box.
Drive Chain --- connects the drive motor sprocket
to the drive side of the conveyor assembly. Lo-
cated inside the control box.
Baking Chamber --- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles --- distribute heated air to the bottom of
the baking chamber. Located inside the oven, un-
der the conveyor belt.
Nozzle Hold- Down Bracket --- holds the front end
of the nozzles in position. Located inside the oven.
End Plugs --- keep heat in the baking chamber.
Located on each end above and below the con-
veyor belt.
Crumb Pan --- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door --- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides) --- d i s -
tribute heated air to top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Conveyor Support
Assembly
Air Flow
Plate
Handle for
Pull Down Door
Crumb
Pan
Control
Box
Nozzles
Upper
End Plug
Lower
End Plug
Conveyor
Support
Assembly
Conveyor Belt
Figure 2