Specifications

Maintenance
23
Troubleshooting Guide
POSSIBLE CAUSE(S) SUGGESTED REMEDY
SYMPTOM: Blower motor(s) not running
S BlowercontrolswitchinOFFposition
S No power to oven
S Motor fuses blown
S Control circuit fuse blown (right fuse on control
panel door)
S Motor(s) burned out
S Turn switch to ON
S Replace main fuses or reset breakers
S Replace fuses
S Replace fuses
S *
SYMPTOM: Main temperature control displays EEE
S Temperature control not properly installed
S Internal problem with main temperature control
S Loose thermocouple connections at main tem-
perature control
S Short in thermocouple
S Reinstall
S *
S *
S *
SYMPTOM: Burner will not fire
S BlowercontrolswitchinOFFposition
S Blow er motor(s) not running
S Cooling blower not working properly
S Defective main temperature control
S Main temperature control not set above ambient
temperature
S Manual gas valve closed
S Turn switch to ON
S Blow er motor(s) must be running. Check control
switch and/or fuses
S *
S *
S Set to desired temperature
S Open valve
*Denotes remedy is a difficult operation and should b e performed by qualified personnel only. It is recommended, however, that
All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot as-
sume responsibility for damage as a result of servicing done by unqualified personnel.
WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.