Specifications

Maintenance
21
Cleaning
Top view of oven
Right to Left Belt Direction
LH
Air Plate
M8702
RH
Air Plate
M8703
LefttoRightBeltDirection
LH
Air Plate
M8785
RH
Air Plate
M8786
Nozzle MT8700
1holeinflange
at the open end
Nozzle MT8701
2holesinflange
at the open end
Top view of oven
M8700
M8701
Figure 27
Every 12 Months:
A factory authorized service person should:
1. Open and clean the insideof the controlpanel.
2. Check and tighten all electrical connections.
3. Check DC gear motor brushes for wear.
4. Check conveyor drive chain for cleanliness
and proper lubrication.
If maintenance is required contact your local ser-
vice company, a factory representative or the
Blodgett Oven company.
WARNING!!
Alway s disconnect the p ower supply be-
fore cleaning or servicing the oven.
WARNING!!
If the oven needs to be moved, the gas
must be turned off and disconnected from
the unit before removing the restra int. Re-
connect the restraint after the oven has
been returned to its original location.