Specifications

Installation
7
Oven Assembly
CONVEYOR BELT SUPPORTS
1. Slide the left conveyor belt support (with the
sprocket on the end of the shaft) into the sup-
port tracks. Push until the end sprocket is in-
serted into the control compartment.
Figure 5
2. Install the drive chain around the drive motor,
and then around the sprocket on the conveyor
belt support. See Figure 6.
Figure 6
3. Push the drive motorback to tighten thechain.
Secure the motor with four 1/4 -20 hex head
bolts.
4. Slidetherightconveyorbeltsupportintothe
support tracks until it touches the left support.