Specifications

Maintenance
22
Troubleshooting Guide
POSSIBLE CAUSE(S) SUGGESTED REMEDY
SYMPTOM: Blower Motor(s) not running
S BlowercontrolswitchinOFFposition
S No power to oven
S Motor fuses blown
S Control circuit fuse blown (right fuse on control
panel door)
S Motor(s) burned out
S Turn to ON position
S Replace main fuses or reset breakers
S Replace fuses
S Replace fuses
S *
SYMPTOM: Main temperature control displays EEE
S Temperature controller not properly installed
S Internal problem with main temperature control
S Loose thermocouple connections at main
temperature control
S Short in thermocouple
S Reinstall
S *
S *
S *
SYMPTOM: Burner will not fire
S BlowercontrolswitchinOFFposition
S Blow er motor(s) not running
S F ront cooling fan not working properly
S Defective main temperature controller
S Main temperature controller not set above
ambient temperature
S Manual gas valve closed
S Turn to ON position
S Blow er motor(s) must be running. Check control
switch and/or fuses.
S *
S *
S Set to desired temperature
S Open Valve
*Denotes remedy is a difficult operation and should b e performed by qualified personnel only. It is recommended, however, that
All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot as-
sume responsibility for damage as a result of servicing done by unqualified personnel.
WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.