Specifications

Installation
6
Oven Assembly
OVEN SUPPORTS AND CASTERS
1. Bolt the supports to the oven with 3/8-16 hex
head bolts.
NOTE: Install the locking casters on the front
of the oven.
2. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto t he casters.
3. Engage the brakes on the front casters.
4. Remove the crating supports from the rear of
the oven.
Crating
Support
Figure 3
RETURN AIR DIVERTERS
1. Slide the left and right air diverters into the bot-
tom of the baking chamber. See Figure 4 for
proper orientation. The outside edges of the
diverters should be 3” (11.8 cm) from the edge
of the oven.
Front of
Oven
3” (11.8 cm)
Figure 4