Owner`s manual

PLC Control Startup
25
Temperature Calibration
6. The display reads:
OVEN TEMP XXXF
OFFSET +( ---)XXXF
NOTE: The offset equals the setpoint minus
the probe temperature.
NOTE: The top line now displays the operating
oven temperature including the offset.
You can use the arrow keys to scroll to a de-
sired offset value. Press the ENTER/RESET
key to accept th e offset.
7. The display reads:
CALIBRATION DONE?
U P --- E X I T D O W N --- C O N T
Press the up arrow key to exit the Temperature
Calibration mode and return to the service lev-
el menu or press the down arrow key to return
to step 3 of the temperature calibration proce-
dure.
To Exit Configuration and Calibration Mode:
1. Press and hold the UP ARROW and ENTER/
RESET keys simultaneously for approximately
three seconds.