Specifications

Installation
5
Oven Assembly
LEG ATTACHMENT
1. Lay the oven on its back.
2. Align the threaded stud in each leg with the
nut located inside each bottom corner of the
ovenframe. Turn the legsclockwiseandtight-
en to the nearest full turn.
3. Align the two leg plate holes in each leg with
thoseinthe ovenbottom. Secureeach legus -
ing two 1/2” bolts.
NOTE: If using casters see CASTER AS-
SEMBLY before proceeding.
4. Tip the oven up on the legs.
5. Levelthe oven by screw ing the adjustableleg
feet in or out as necessary.
6” (15 cm) Legs Shown
Figure 3
CASTER ASSEMBLY
NOTE: Install the locking casters on the front of
theoven.Installthenon-lockingcasterson
the back of the oven.
Casters for Single and Double Stacked Ovens:
1. Attach the legs as described.
2. Pry the adjustable feet out of the legs
3. Insert one caster into each leg as shown.
Tighten the lock nuts to secure the casters.
25” (64 cm) Legs Shown
Adjustable
Leg Foot
Caster Assembly
Figure 4
LowProfileCastersforDoubleStackedOvens:
1. Align the three holes in each caster assembly
plate with those in the oven bottom. Secure
each caster using three 1/2” bolts.
Figure 5