Specifications
Maintenance
31
Cleaning and Preventative Maintenance
DAILY CLEANING
Oven Cool Down:
1. Turn the oven to COOL DOWN.
NOTE: The doors may be opened to speed the
co oling process.
Cleaning the exterior
1. Saturate a cloth with a mild soap and w ater
mixture. Wipe the oven when it is cold.
2. Dry the oven with a clean cloth.
3. Heat tint and heavy discolo rati on may be re-
moved with any non- toxi c, non-causti c, com-
mercial oven cleaner and stainless steel polish.
Cleaning the interior
Deposits of baked on splatter may be removed with
any non-toxic, non-caustic, food safe, commercial
oven cl eaner.
1. Apply cleanerfollowing the manufacturer’s di-
rection.Alwaysrubwiththe grainofthemetal.
WEEKLY CLEANING
1. Remove any loose debris or particle buildup
from the racks, rack supports, baffle, blower
wheel and temperature probe.
MONTHLY CLEANING
Clean racks, rack supports, baffle and blower
wheel
1. Remove the racks, rack supports and baffle.
2. Hold the blower wheel with a gloved hand.
3. UseanL-shapedbrushtocleanthefinsonthe
blower wheel.
4. Use a hand brush to clean the center portion
of the blower w heel.
5. Wipe around the fan with a damp towel.
6. Soak racks, supports and baffle in a solution
of non-toxic, non -caustic, food safe, commer-
cial oven cleaner. Allow t o soak overnight if
necessary.
7. Reinstall parts.
Clean temperature probe
1. Useadamptoweltowipetheprobe.Handle
with care.
Clean cooling fan
1. Brush off the cooling fan located on the back
of the oven behind the control compartment.
PREVENTATIVE MAINTENANCE
Annual Maintenance
The following checks should be part of an annual
scheduledmaintenance.Thismaintenancemust
be performed by anauthorized serviceagency.
Contact your local Blodgett service company, a
factory representative or the Blodgett Oven com-
pany.
1. Check venting system.
2. Check temperature calibrati on.
3. Adjust and grease door switch for proper clo-
sure.
4. Clean any debris out of control tray. Check for
loose connections. Replace any discolored
connections.
5. Retorque all electrical connections between
the element and contactors.
WARNING!!
Always disconnect the appliance from the
power supply before servicing or cleaning.