Specifications

Operation
29
Blodgett IQ2T Control
Programming the shelf sensitivity
The controller allows the user to program a sensi-
tivity value(0---9) for each shelf position. The sen -
sitivity value will shorten or stretch cook time de-
pending upon shelf position.
NOTE: SEN1 is the top shelf position, SEN5 is the
bottom shelf position.
1. The display reads SEN1.
2. Press the TOGGLE/CLEAR KEY (11) to clear
the currentvalue tothe desiredvalue.U sethe
productkeynumberstoinputanewsensitivity
value.
3. Press the SCAN KEY (15) to advance t o the
next shelf position, SEN2.
4. Repeat steps 2---3 for all five shelf positions.
Exiting the programming mo de
1. The top display reads SYS.PressthePROG
KEY (10). The controlreturns to the operating
mode.
ERROR CODES AND ALARMS
NOTE: The error codes will appear in the top dis-
play. All error codes are accompanied by
an audible alarm.
Hi Oven temperature is more than
40_F above the highest setpoint.
Prob Probe failure.
HEA T ERR From a cool start (below 140_F), the
oven takes more than 10 minutesto
climb from 150-300_F. Press the
TOGGLE/CLEAR KEY (11) to clear
the prompt. This code indicates a
problem with the system. Contact a
service technician.
FAN ERR Indicates a fan failure during a call
forheat. Press the TOGGLE/CLEAR
KEY(11)toclearthealarm.TheFAN
ERR display remains active. Press
theTOGGLE/CLEARKEY(11)again
to clear the message and return the
system to normal operation. If con-
dition persists turn off the oven and
contact a service technician.
FANC ERR Indicates a contact failure has oc-
curred in the fan control circuit.
PresstheTOGGLE/CLEARKEY(11)
to clear the alarm. The FANC ERR
display remains active. Press the
TOGGLE/CLEAR KEY (11) again to
clear the message and return the
system to normal operation. If con-
dition persists turn off the oven and
contact a service technician.
DOOR OPEN The controller senses the door is
open. Close the door. If the door is
closed contact a service technician.