HV100 Owners Manual

Installation

Utility Connections - Standards and Codes

THE INSTALLATION INSTRUCTIONS CONTAINED

HEREIN ARE FOR THE USE OF QUALIFIED INSTAL-

LATION AND SERVICE PERSONNEL ONLY. INSTAL-

LATION OR SERVICE BY OTHER THAN QUALIFIED

PERSONNEL MAY RESULT IN DAMAGE TO THE OVEN

AND/OR INJURY TO THE OPERATOR.

Qualied installation personnel are individuals, a rm,

a corporation, or a company which either in person or

through a representative are engaged in, and are respon-

sible for:

• The installation or replacement of gas piping. The

connection, installation, repair or servicing of equip-

ment.

• The installation of electrical wiring from the electric

meter, main control box or service outlet to the elec-

tric appliance.

Qualied installation personnel must be experienced in

such work, be familiar with all precautions required and

have complied with all requirements of state or local au-

thorities having jurisdiction.

U.S. and Canadian Installations

Installation must conform with local codes, or in the ab-

sence of local codes, with the National Fuel Gas Code,

NFPA54/ANSI Z223.1-Latest Edition, the Natural Gas In-

stallation Code CAN/CGA-B149.1 or the Propane Instal-

lation Code, CAN/CGA-B149.2 as applicable.

Reference: National Electrical Code, ANSI/NFPA 70-Lat-

est Edition and/or Canadian Electrical Code CSA C22.1

as applicable.

This equipment is to be installed in compliance with the

Basic Plumbing Code of the Building Ofcials and Code

Administrators International Inc. (BOCA) and the Food

Service Sanitation Manual of the Food and Drug Admin-

istration (FDA).

Appliance is to be installed with backow prevention in

accordance with applicable federal, province and local

codes.

General Export Installations

Installation must conform with Local and National instal-

lation standards. Local installation codes and/or require-

ments may vary. If you have any questions regarding the

proper installation and/or operation of your appliance,

please contact your local distributor. If you do not have

a local distributor, please call Blodgett at 0011-802-658-

6600.