Manualshelf

Hydrovection Owners Manual

ManualsBrandsBlodgett ManualsCommercial Convection OvensHV-100E BASE HydroVection Series Energy Star Electric Oven with Steam and Convection Heating, Compact 38" Footprint, Cavity Drain and Stainless Steel Construction: Single Base Oven
12345678910
7
Installation
Caster Attachment
CASTERS FOR SINGLE OVENS
1. Attach the legs as described.
2. Pry the adjustable feet out of the legs.
3. Insert one caster into each leg as shown. Tighten the
lock nuts to secure the casters.
Adjustable
Leg Foot
Caster Assembly
Figure 3
PROFILE CASTERS FOR DOUBLE STACK OVENS
1. Place a level on the oor where the casters are to
rest.
2. Place shims under the low side until it is level.
3. Mount the shims between the casters and the oven
as follows:
a. Align the shims and caster holes with the bolt
holes.
b. Secure with the 1/2” bolts provided.
NOTE: Install them with the locking casters in the
front of the oven. The rear casters do not
lock. Ensure that the locks are set on the
front casters.
4. Tip the oven up on the newly installed casters.
Add shims
as necessary
Floor
Exaggerated for clarity
Figure 4