Specifications

FOREWORD

This technical manual provides installation, operation, and maintenance procedures for the Blodgett Oven,

Model HV-110E. This technical manual is intended for guidance of and use by personnel operating and main-

taining the equipment described herein.

This manual consists of four chapters as follows:

• Introduction

• Installation

• Operation

• Maintenance

Ships, training activities, supply points, depots, Naval Shipyards and Supervisors of Shipbuilding are

requested to arrange for the maximum practical use and evaluation of NAVSEA technical manuals. All errors,

omissions, discrepancies and suggestions for improvement to NAVSEA technical manuals shall be forwarded to:

COMMANDER

CODE 310 TMDERs

NAVSURFWARCENDIV NSDSA

4363 MISSILE WAY BLDG 1389

PORT HUENEME, CA 93043-4307

on NAVSEA/SPAWAR Technical Manual Deﬁciency/Evaluation Report (TMDER), NAVSEA form 4160/1. All

feedback comments shall be thoroughly investigated and originators will be advised of action resulting there-

from. One copy of NAVSEA form 4160/1 is at the end of each separately bound technical manual 8-1/2 x 11

inches or larger. Copies of NAVSEA form 4160/1 may be requisitioned from the Naval Systems Data Support

Activity Code 310 at the above address. Users are encouraged to transmit deﬁciency submittals via the Naval

Systems Data Support Activity Web site located at:

https://mercury.tdmis.navy.mil/def_external/pubsearch.cfm

S6163-CY-FSE-010

FOREWORD-1