Specifications
Operation
21
Solid State Digital Control with Core Temperature Probe
OPERATION
Cook Only:
1. Turn the SELECTOR switch (1) to the desired
position. If high fan is chosen, high rate may be
selected by toggling the RATE SWITCH (14).
2. Press TEMP (7) key. Rotate the DIAL (6) to enĆ
ter the cook temperature.
3. Press TIME (8) key. Rotate the DIAL (6) to enĆ
ter the cook time.
NOTE: Time is entered in hours:minutes
(0:00) or minutes:seconds (00:00).
4. Load product into the oven.
NOTE: The display reads LOAD when the
oven is near the set temperature.
5. Press the START/STOP key (12). The timer beĆ
gins to count down.
6. When the cook timer reaches 00:00 the buzzĆ
er sounds and the display reads DONE.
7. Press the START/STOP key (12) to silence the
buzzer.
8. Remove the product.
Cook with Pulse:
While in pulse mode the fan will cycle on for 30 secĆ
onds and off for 30 seconds for the duration of the
pulse time entered. The pulse time is displayed in
min:sec. (Example 15 minutes = 15:00). Pulse time
is a portion of the cook time and does not increase
the cook time.
NOTE: The LED on the PULSE key is lit when
pulse mode is on and off when pulse
mode is off.
1. Turn the SELECTOR SWITCH (1) to the deĆ
sired position. If high fan is chosen, high rate
may be selected by toggling the RATE
SWITCH (14).
2. Press TEMP (7) key. Rotate the DIAL (6) to enĆ
ter the cook temperature.
3. Press TIME (8) key. Rotate the DIAL (6) to enĆ
ter the cook time.
NOTE: Time is entered in hours:minutes
(0:00) or minutes:seconds (00:00).
4. Press PULSE KEY (9). Rotate the DIAL (6) to enĆ
ter the duration of the pulse time. Pulse time
must be a minimum of one minute.
5. Load product into the oven.
NOTE: The display reads LOAD when the
oven is near the set temperature.
6. Push START/STOP KEY (12). The timer beĆ
gins to count down the cook time. The oven
will be in pulse mode for the set pulse time.
Once the set time has expired, the unit will auĆ
tomatically switch to cook mode and continue
counting down.
7. When the cook timer reaches 00:00 the buzzĆ
er sounds and the display reads DONE.
8. Push the START/STOP KEY (12) to turn the
buzzer off.
9. Remove the product.