Specifications

Operation
20
Solid State Digital Control with Core Temperature Probe
1
2
3
4
5
6
9
12
8
7
10
14
15
13
11
Figure 13
CONTROL DESCRIPTION
1. SELECTOR SWITCH - controls power to the
oven for high fan, low fan or cool down
2. DISPLAY - displays time, temperature and
other information related to oven function
3. HEAT LAMP - lights when heater is on
4. CORE ACTUAL TEMP LAMP - lights when
the actual temperature of the core probe is
displayed
5. CAVITY ACTUAL TEMP LAMP - lights when
the actual temperature of the oven cavity is
displayed
6. DIAL - used to enter set points in display
7. TEMP KEY - press and release to set oven
temperature or display set temperature
NOTE: Actual temperature is shown while the
TEMP key is held down.
8. TIME KEY - press to set cook time
NOTE: Time key is disabled when cooking
with core probe
9. PULSE KEY - press to turn Pulse Mode on or
off. While in pulse mode the fan will cycle on
for 30 seconds and off for 30 seconds.
10. CORE PROBE KEY - press to program or disĆ
play core probe temperature
11. COOK & HOLD KEY - press to turn Cook &
Hold Mode on or off
12. START/STOP KEY - press to start or stop the
timer
13. LIGHTS SWITCH - controls interior lights
14. RATE SWITCH - switches oven between
standard rate (60,000 BTU) and high rate
(80,000 BTU) while in high fan
NOTE: High rate is disabled with low fan.
15. GAS ON/OFF SWITCH - press to shut off gas
to the oven