Specifications

Maintenance
21
Spray Bottle Operating Procedure
1. Unscrewthesprayerheadandfillthecontain-
ertotheM AXmark.Screwtheheada ssembly
on firmly to ensure an airtight seal. The liquid
mustbecleanandfreefromforeignmatter.Do
not overfill - space must be left for compress-
ing air.
2. Tobuilduppressure,pumpapproximately20
fullstrokeswhenthecontainerisfilledwithliq-
uid. The higher the pressure, the finer the
spray. If the container is only partially filled,
then more pumping is required to compress
the a dditional air space.
3. Tospray, depressthe triggerwith yourthumb.
4. After a period of spraying, the pressure will
drop. Restore the pressure by operating the
air pump.
5. Release pressure after u se by inverting t he
spray head and depressing the trigger or by
slowly unscrewing the spray headassembly
which will allow air to escapefrom aroundthe
filling aperture.
6. Afteruse, rinsethespraybottlewithcleanwa-
terandcheckthatthe holeinthenozzleisper-
fectly clean and clear. Warm water (not hot)
used with a household detergent is a useful
cleaning agent for this purpose.
NOTE: Further information can be found inthe in-
struction leaflet supplied with your spray
bottle.
Service Parts:
Complete spray bottle P/N R0006
Spray nozzle repair kit P/N R 6332
WARNING!!
Protective clothing and eye wear should
be worn while using cleaning agents.
MAX
Spray Head
Pressure Pump
Spray Trigger
Pressure
Vessel
Pump
Clean the pump 2 or 3 times per week with warm water
Figure 15