Specifications

Maintenance
40
Deliming
To set the deliming interval:
1. Remove power from the appliance.
2. Remove the two screws located on the side
panel. Slide the control module forward. See
Figure 29.
3. Turn the potentiometer to the required setting.
See Figure 30.
4. Slide the control back in, replace the two
screws.
5. Apply power to the appliance.
A PC may be connected at power up of the ap-
pliance to verify the potentiometer setting. The “De-
liming interval is x hour(s) of steam generator run
time.” Status line will show 30, 60 or 90. Refer to
Figure 32 on page 41.
Figure 29
Figure 30
Setting A
Setting C
Setting B
Potentiometer Settings
TP4
Figure 31