Specifications

Maintenance
38
Deliming
7. Fill the solution reservoir with a nonĆdiluted deĆ
liming agent such as LimeĆAway by EcoĆLabs
or LimeĆOut by US Chemical.
8. Prime the delivery line by turning the oven into
COOL DOWN mode and depressing and
holding the On Demand Steam button. ReĆ
lease the button once the fluid has traveled
through the line and has reached the rear of
the oven.
DELIMING WITH OPTIONAL DELIMING PUMP
NOTE: The following procedures apply to models
BC14E and BC14G only.
NOTE: The Delime lamp must be flashing to start
this process.
1. Be sure the container delivering the deliming
agent to the appliance is full.
2. Be sure the door is open.
3. Turn the oven into Cool Down mode. Press
and release the On Demand Steam button.
The Delime lamp will flash faster, acknowledgĆ
ing the action.
4. Turn the oven to the OFF mode.
5. The remainder of the procedure is automatic.
The Delime lamp will stay illuminated while the
process is active. When the process is comĆ
pleted, the Delime lamp will turn off indicating
the appliance can now be used normally.
Inlet Plug
Power Outlet
Figure 27