Specifications

Maintenance
37
Deliming
Figure 23
4. Unscrew the inlet plug from the back of the
oven. Install the threaded/barbed fitting in the
oven inlet.
Inlet Plug
Fuse Holder
Figure 24
5. Attach one end of the tubing supplied to the
pump outlet with a barbed fitting and hose
clamps. Route the tubing to the oven inlet in
such a way as to prevent contact with hot surĆ
faces, such as the oven flue. Cut the tubing to
length and attach it to the inlet fitting with a
hose clamp. Secure it to the oven using cable
clamps supplied. Repeat steps 3 and 4 for the
second oven if required.
Figure 25
6. Remove the fuseholder from the power outlet
on the back of the oven(s). Insert the fuses proĆ
vided. Reinstall the fuseholder. Plug the power
cord from each pump into the outlet on the
back of each oven. Be sure to plug each pump
into the same oven where it's tubing is conĆ
nected.
Power Cord
Figure 26