Specifications

Operation
24
Standard Controls
2
6
5
3
9
10
11
7
8
1
4
Figure 13
CONTROLS IDENTIFICATION
1. POWER ON LAMP - when lit indicates power
to the unit is turned on.
2. MODE SELECTOR SWITCH - turns power
to the oven on or off. Allows selection of
Steam, Hot Air, Combi or Cool Down Modes.
3. TEMPERATURE DIAL - used to set desired
cooking temperature.
4. HEAT ON LIGHT - When lit indicates that the
unit is heating. The light goes off when the unit
has reached the set temperature.
5. STEAM ON DEMAND TIMER - used to set
steam time
6. STEAM ON DEMAND SWITCH - used to iniĆ
tiate steam injection cycle
7. STEAM ON DEMAND LAMP - illuminated
when steam on demand is activated.
8. TIMER DIAL - used to set desired cook time.
9. FAN SPEED SWITCH - used to select low or
high speed.
10. DELIME LAMP - Flashes when steam generĆ
ator deliming is needed. Remains steady
when deliming process is active.
NOTE: B14G does not have a delime lamp.
11. BC14 FILL LAMP - illuminated until the
steam generator is filled with water
B14 CLEAN OVEN LAMP - informs user to
clean oven, including behind the fan guard
and fan