Specifications

Installation
12
Stacking
WARNING!!
Stacking should be performed by qualiĆ
fied installation personnel only. The apĆ
pliances are heavy. Take care to use propĆ
er tools and techniques when lifting and
stacking appliances.
1. Remove the drip pan from the top appliance.
2. Attach the legs or casters to the bottom apĆ
pliance. See page 10.
3. Place the top appliance on the bottom apĆ
pliance. Be sure all four sides are flush.
4. Bolt the two appliances together using the
bolts provided.
5. GAS APPLIANCES ONLY: Attach the flue
vents as shown.
NOTE: For electric appliances proceed to
step 6.
6. Replace the drip pan. Push to the right until it
stops. The right side should overhang the oven.
7. Connect the drain, gas (if applicable), electriĆ
cal and water. Refer to pages 14-18.
NOTE: An optional gas manifold may be purchased
from Blodgett Combi. Order part number
R9570.
Drip Pan
Steam Generator Flue
(BC14 only)
Gas Oven
Hot Air Flue
Rear View
BC14G Shown
Drain Assembly/
Steam Vent
Optional
Gas Plumbing Manifold
Mounting
Bracket
Figure 5