Specifications

Operation
20
CTBR-AP Control
Programming the PreAlarms:
A PreAlarm is a n alarm that sounds during the
cook cycle. PreAlarms can be used to alert the op-
erator that the product needs to be t urned or
stirred, etc. Up to three PreAlarms can be pro-
grammed for each product.
1. The top display reads A1. The bottom display
gives the alarm time. Use the product keys to
enter t he desired time for the first alarm. Press
the ENTER KEY (13) to enter the PreAlarm
time.
NOTE: PreAla rm times are measure d from th e
end of the total cook time. For example
if the total cook time is 30:00 and a
PreA larm of 5:00 is ente re d, th e alarm
will sound 25 minutes into the cook
cycle. If a PreAlarm of 0:00 is entered,
no a dditio na l PreA la rms may be pro-
grammed for the selected product key.
2. Press the SCAN KEY (14).
3. The top display reads AUTO. The bottom dis-
play reads either YES or no. Press the
TOGGLE/CLEAR KEY (10) to toggle betw een
YES and no. Press the SCAN KEY (14) to enter
the PreAlarm t ype.
NOTE: An auto PreAlarm sounds for approxi-
mately 5 seconds, then shuts off auto-
matically. For manual PreAlarms the
operator must press the product key
to silence the alarm.
4. The top display reads A2__. Repeat steps 1---3
for the second and third PreAlarm. When all
PreAlarms have been entered the control ad-
vances to programming the head count.
Programming the Head Count:
1. The top display reads HEAd. The bottom dis-
play gives the current number of heads pro-
grammed for this product key. Use the prod-
uct keys to enter the desired number of heads
f r o m 1 --- 9 9 .
2. Press t he SCAN KEY (14). The programming
forthisrecipeisnowcomplete.
Exiting the programming mode:
1. The top display reads Prod. Press the PROG
KEY (9). The control returns to operating
mode.