Specifications

Installation
11
Oven Assembly
VENTILATION
SINGLE OVENS
1. Mount the vent shield with the vent guard.
Align the mounting holes in the vent shield
with top holes in the vent guard.
DOUBLE STACKED OVENS
Tw o CTBR- AP ’ s or a CTB bisc u it oven on t op of
aCTBR-AP
1. Connect the upper and low er flues with the
vent riser. Mount the vent s hield with the vent
riser. Align the mounting holes in the vent
shield with top holes in the vent riser.
Stacking a CTBR-AP on top of a Mark V
1. Mount the vent shield with the vent guard.
Align the mounting holes in the vent shield
with top holes in the vent guard.
2. Insert the flue extension over the flue on the
Mark V. Attach using screws provided.
NOTE: If the oven has a vent guard it must be
removed before installing the flue ex-
tension.
3. Slide the flat plate of the flue brace under the
top cap on top the CTBR-AP. The two holes in
the end of the brace must line up w ith the
holes in the flue extension.
4. Attach the flue brace to the flue extension with
the screw s provided.
Flue
Extension
Flue
Brace
Vent
Riser
Vent
Shield
Top C a p
CTBR-AP on a Mark VCTBR-AP on a CTBR -AP
Vent
Guard
Vent
Shield
CTBR-AP Single Oven
Vent
Guard
Vent
Shield
Figure 7