Specifications

SECTION 3
OPERATION
25
Display
Shows the Set Point
or the Actual Tem-
perature in degrees
Fahrenheit (F) or
Celsius (C).
"SP LOCK"
Light
Lights when the set
point is locked out
from changes. This
setting can only be
changed by service
personnel.
OVERTEMP
Light
Lights when the oven
temperature is greater
than 650°F (343°C).
Refer to
Quick
Reference: Trouble-
shooting in this
section.
Temperature Key
Press this key once to
view the Actual
Temperature in the
Display.
Unlock Key
Press this key
together with the Set
Point Key to allow the
Set Point to be
changed. Changes
can only be made for
60 seconds.
Up Arrow and Down
Arrow Keys
Press these keys to adjust
the Set Point up or down.
If the Set Point will not
change, refer to
Set Point
Key and Unlock Key in
this section.
Set Point Key
Press this key
together with the
Unlock Key to allow
the Set Point to be
changed.
Changes can only be
made for 60 seconds.
Service Key
Service use
only.
"ACTUAL TEMP"
Light
Lights when the Actual
Temperature is shown
in the display.
"SET PT"
(setpoint) Light
Lights when the set
point is shown in
the display.
"HEAT ON" Light
Lights when the
burner is in
operation.