Manual

Maintenance

Troubleshooting Guide

POSSIBLE CAUSE(S) SUGGESTED REMEDY

SYMPTOM: Elements will not heat

• Oven not plugged in.

• Power switch on the control panel is off.

• Control set below ambient temperature.

• Doors are open.

• Plug in electrical supply cord.

• Set the control panel to COOK or OVEN ON.

• Set to desired cook temperature.

• Close doors.

SYMPTOM: Oven does not come to ready.

• The oven has not reached preheat temperature.

• Internal problem with main temperature control.

• Wait for oven to reach preheat temperature.

• *

SYMPTOM: Convection fan does not run.

• Oven is not plugged in.

• Circuit breaker tripped.

• Doors are open

• Plug in electrical supply cord.

• Reset the breaker.

• Close doors.

SYMPTOM: General baking problems.

• Thermostat out of calibration.

• Improper oven venting.

• x

*Denotes remedy is a difcult operation and should be performed by qualied personnel only. It is recommended, how-

ever, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator.

Blodgett cannot assume responsibility for damage as a result of servicing done by unqualied personnel.

WARNING!!

Always disconnect the power supply before cleaning or servicing the oven.