Specifications

Maintenance
38
Cleaning and Deliming (BXĆ14 units only)
BXĆ14 Boilerless Deliming
It may also be necessasry to delime the oven cavĆ
ity and behind the fan guard of this oven. This is
necessary for proper functioning of the oven. Lime
may build up on the fan and heat source leading
to a less efficient oven.
1. Turn off the oven. Make sure that the oven is
cooled down to under 140_F (60_C).
2. Remove the rack guides.
Figure 20
3. Rotate the two screws on the left side of the fan
guard. Swing the fan guard toward the front of
the oven.
Figure 21
4. Thoroughly spray deliming agent onto the fan,
heat source and back of the fan guard. Wait 10
minutes.
NOTE: Be sure to use a nonĆdiluted deliming
agent such as Lime Away" by EcoĆ
Labs or Lime Out", by US Chemical.
5. After ten minutes, rinse the deliming agent off.
Return the fan guard to the closed position.
Rotate the two screws to secure the fan guard.
6. Reintall the rack guides and oven racks.
7. Leave the oven door open overnight to vent
the oven. If the oven will not be used for an exĆ
tended period of time, place the oven in hot air
mode to dry the interior cavity.
WARNING!!
If the lime scale is hard to remove or takes
multiple applications, your water filtration
system may be insufficient or your filters
may need to be changed. Blodgett
strongly suggests you work with a water
filter expert such as Everpure or Cuno to
determine the right filtering system to proĆ
tect your Blodgett Combi.