Specifications

Operation
30
MenuSelectt Control for Models BCXĆ14 and BXĆ14
MANAGER PROGRAMMING
Entering the Manager Program Mode
1. Press the MAINTENANCE KEY (19). If the conĆ
trol is password protected, the display reads
ENTER CODE. Use the alpha/numeric keypad
to enter the manager passcode 3124, then
press the center of the dial to enter the proĆ
gram mode.
1. Turn the dial to highlight OVEN SETUP. Press
the center of the dial to select the product.
Programming Auto Start
NOTE: The Auto Start function enables the oven to
turn on at a programmed time of day and
preheat to a programmed temperature.
1. Turn the dial to highlight AUTO START. Press
the center of the dial to select.
2. Turn the dial to select either ON or OFF. Press
the center of the dial to select.
If ON is selected, the display reads AUTO
START 24 HOUR TIME 00:00. Turn the dial to
enter the time you would like the oven to begin
preheating. Press the center of the dial to seĆ
lect.
The display reads AUTO START TEMP XXX.
Turn the dial to enter the desired preheat temĆ
perature. Press the center of the dial to select.
Programming Oven Setup
These menus allow the manager to set up basic
oven functions
1. Turn the dial to highlight OVEN SETUP. Press
the center of the dial to select.
2. Turn the dial to highlight MANAGER PROĆ
GRAM. Press the center of the dial to select.
3. Turn the dial to highlight the oven function you
with to change. Press the center of the dial to
select. Choose from the following functions:
Recipe Password - Select YES or NO to enĆ
able password protection on recipe programĆ
ming. If YES is selected the passcode 3124
must be entered to change recipe programĆ
ming.
Temp Unit - Select either degrees F or C.
Cool Down Temp - Select the set temperaĆ
ture for the oven to achieve in Cool Down
mode
Temp Disp Rate - Set the rate, in seconds,
at which the display switches between actual
and setpoint temperature
Input Rsp Time - Set the length of time alĆ
lowed to input each variable when programĆ
ming recipes before control automatically exĆ
its out
Setback Time - When not used for a period
of time, the oven temperature will automaticalĆ
ly reduce to conserve energy. This variable
sets the length of time the oven remains at the
idle temperature before being lowered.
Ready Beep - Select either ON or OFF. This
is the audible alarm that sounds when the
oven has reached the set temperature.
Cook Done Beep - Select either ON or OFF.
This is the audible alarm that sounds when the
product cook time has expired.
Cook Cool Fan - Select either YES or NO.
This function allows the control to display
OPEN OVEN DOOR when you are attempting
to lower the set temperature of the oven.
Restore Manual SE - Select either YES or
NO. This variable enables the oven to rememĆ
ber the last settings used for manual cooking.
NOTE: The following apply to BCX models
only.
Boiler Set Temp Preheat - Select the temĆ
perature in the boiler when it is in stand by
Boiler Set Temp Cook - Select the temperaĆ
ture in the boiler when steam is being proĆ
duced
Delime Fill Time - Set the length of time the
boiler continues to fill with deliming solution
beyond the standard water level in order to enĆ
sure all of the scale present in the boiler is reĆ
moved.
Delime Interval - Set the length of time beĆ
tween deliming intervals