Specifications

Operation
22
Standard Controls for Models BCXĆ14 and BXĆ14
3
6
4
10
7
1
5
13
15
8
9
11
12
14
16
17
2
Figure 13
CONTROLS IDENTIFICATION
1. MODE SELECTOR SWITCH - turns power
to the oven on or off. Allows selection of
Steam, Hot Air, Combi or Cool Down Modes.
2. DISPLAY - displays time and temperature inĆ
formation.
3. TEMPERATURE DIAL - used to set desired
cooking temperature.
4. HEAT LAMP - lights when the oven is calling
for heat
5. TIMER LED - lights when the cook time is
displayed
6. PROBE ACTUAL LED - lights when the actuĆ
al probe temperature is displayed
7. PROBE SETPOINT LED - lights when the
core setpoint temperature is displayed
8. TIMER/PROBE KNOB - use to select and
set either cook time or probe temperature
9. STEAM ON DEMAND DISPLAY - displays
the steam on demand time
10. STEAM ON DEMAND LAMP - lights when
steam on demand is activated.
11. STEAM ON DEMAND KNOB - use to set
duration for steam on demand
12. LIGHTS KEY - press to turn the oven lights
on and off
13. FAN SPEED KEY - used to select fan speed.
14. CAVITY VENT KEY - used to open or close
vent to release steam from cavity.
15. DELIME LAMP (BCXĆ14 ovens only) -
Flashes when steam generator deliming is
needed. Remains steady when deliming proĆ
cess is active.
16. FILL LAMP - illuminated until the steam genĆ
erator is filled with water.
NOTE: Model BXĆ14 ovens do not have a fill
lamp.
17. PROBE CONNECTION - used to connect
the core temperature probe to the control.