Manual

4 OM-40ES-KLT
The Blodgett 40ES-KLT is a floor-mounted, tilting, steam jacketed kettle with a
thermostatically controlled, self-contained, electrically-heated steam supply and
appropriate controls, mounted on a sturdy base.
The body of the kettle is constructed of stainless steel, welded into one solid piece.
The kettle is furnished with a reinforced rim and a butterfly shaped pouring lip. It has a
steam jacket rated for working pressures up to 50 PSI. Kettle finish is 180 emery grit
on the inside and bright semi-deluxe on the outside.
The kettle can be tilted with a hand crank to pour out its contents. Stainless steel
panels enclose the controls and the base. Four stainless steel, tubular legs support
the unit. Bullet feet on each of the legs can be adjusted to level the kettle. The units
include a two inch tangent draw off valve.
A built-in steam generator, sized for the kettle capacity and heated by electricity,
delivers steam into the jacket. “Airless” operation of the steam jacket permits uniform,
efficient heating at temperatures as low as 150°F and as high as 298°F. In addition
to the adjustable thermostat for operating control, the unit has a tilt cut-off switch,
low water cut-off, safety valve, and high-limit pressure switch as safety features. A
heating indicator light, pressure gauge, and sight glass are provided for monitoring
kettle operation.
A single electrical connection is required for installation. The unit may be ordered
for use with 208/240, 400 or 480 volt power. All kettles are wired for three-phase
operation. Single-phase units are also available.
KETTLE CHARACTERISTICS
Kettle Capacity 40 Gallon 150 liter
Jacket Capacity 4 Gallon 15.1 liter
Inside Diameter 30 inches 762 mm
Rim Height 39 inches 991 mm
Total Width 47 inches 1194 mm
Front-to-Back 35 inches 889 mm
Equipment Description
Optional equipment available with the kettles:
1. 2” diameter tangent draw-off (product valve)*
2. Strainers, solid disk, 1/4” or 1/8” perforations.
3. Lift-off or counterbalanced cover*
4. Water fill faucets
5. Basket cooking system
6. Kettle brush kit
7. Gallon etch marks*
*Factory installed Options.
Pressure Gauge
Thermostat Dial
Tilting Crank
Optional Draw-Off Valve
Water Gauge Glass