Programming instructions

CONVEYOR OVEN CONTROLS
2-8
DISPLAY INFORMATION
D WAIT D LOW - indicates that the present oven
temperature is lower than the set point temperaĆ
ture. When the oven reaches the set point temĆ
perature the display changes to READY.
D READY - indicates that the oven is ready to acĆ
cept product.
D SET D TEMP D mmss - indicates the current cook
time setting.
D HIGH D TIME - indicates that the temperature is
well above the set point. This usually occurs
when moving from a higher āto a lower temperaĆ
ture. Wait until the display reads ready before
loading product.
D HIGH D TEMP D LIMIT - indicates that the oven
temperature exceeds the high limit from the 2nd
level program. The Over Temperature Alarm
buzzer will sound. Shut the oven off and wait for
the unit to cool down.
D HIGH D TEMP D PANEL - indicates that the control
area reaches an excessive temperature. Shut
the oven off and wait for the unit to cool down. ErĆ
ror code generally means loose ground wire.
D PROBE D OPEN D PROBE D SHORT - indicates
that the temperature sensor has failed. The
Alarm buzzer sounds. Shut the oven off and conĆ
tact a service representative.