Programming instructions

OPERATION & CALIBRATION
2-3
1400 SERIES - ELECTRO MECHANICAL THERMOSTAT & TIMER
TIMER
CF
1
2
3
4
FIGURE 2
COMPONENT DESCRIPTION
1. POWER SWITCH - Controls the power to the
oven. When switched to OVEN ON, the oven is
operating in the normal heating mode. OVEN
OFF, turns the oven off.
2. OVEN THERMOSTAT - Controls the oven temĆ
perature at desired settings.
3. LIGHT OFF OVEN INDICATOR LIGHT - When
lighted indicates heaters are in operation. When
the light goes out, the oven has reached set opĆ
erating temperature.
4. TIMER - Activates an electric buzzer which,
upon expiration of time, will sound to remind the
operator to remove the product.
OPERATION
1. Depress the right hand side of the POWER
SWITCH (1) to turn the oven ON. The elements
will come on, this is indicated by the INDICATOR
LIGHT (3).
2. Set the THERMOSTAT (2) to the desired baking
temperature.
3. The INDICATOR LIGHT (3) will go out when the
oven has reached the set operating temperaĆ
ture.
4. The TIMER (4) is set to measure a cooking cycle
by turning the knob clockwise to the desired
time. When selecting a cook time less than ten
minutes, turn the knob past the ten minute interĆ
val and reverse direction to the desired setting.
At the end of the elapsed time the buzzer will
sound. The buzzer is turned off by rotating the
TIMER (4) to the OFF position.
NOTE: The TIMER will not control any temperaĆ
ture functions.