Programming instructions

CONVECTION OVEN CONTROLS
1-58
Reset All Counts
XXX
Use the PROGRAM ARROW KEYS (4) to togge
select either Yes (to reset the counts) or No.
Press the PROGRAM KEY (10)
Exiting the SERVICE program mode
NOTE: Use this exit procedure for all service proĆ
gramming options.
1. The display reads:
System
Factory
Use the PROGRAM ARROW KEYS (4) to scroll
up until Exit is highlighted. Press the PROGRAM
KEY (10).
2. The display reads:
Prod Cnt
Programming
Use the PROGRAM ARROW KEYS (4) to scroll
up until Exit is highlighted. Press the PROGRAM
KEY (10) to exit the programming mode.